Mitsubishi MV-2400S

Specifications

Mitsubishi MV-2400S CNC Wire EDM Electrical Discharge Machine

Year of Mfg: 2018

Machine Travels: X x Y x Z: 23.6" x 15.7" x 12.2" (600 x 400 x 310)
Maximum Workpiece Dimensions: 41.3" x 32.3" x 12.0" (1050 x 820 x 305)
Max. Submerged Workpiece Weight: lb (kg): 3307 lbs. (1500)
Table Dimensions: in (mm): 33.0" x 22.0" (840 x 560)
U/V Travels (from center): in (mm):	±3.0" x ±3.0" (±75 x ±75)
Taper Angle @ Thickness: in (mm): 15 deg.@ 10.2 (15 deg.@ 260)
Wide Angle Taper (Optional Guides Required): 45 deg. @ 2.4? 60mm (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min): 51.2 ipm (1300)
Power Supply: V350-V
Minimum Drive Unit / Resolution: 0.000002 / 2 µin ( 0.00005 / 50nm)
Wire Diameter Possible: in (mm): 0.004" ~ 0.012" (0.1~0.3)
Minimum Start Hole Diameter: in (mm): 0.02" (0.5)
Max. Wire Spool size STD [optional]: lb (kg): 22 [44] (10 [20])
Filters / Type: 2 / Paper
Filter Tank Capacity: gal (L): 227 (860)

Machine System Dimensions: in (mm): 105.8"  x 119.3" (2687 x 3030)
Machine Installed Height: in (mm):	84.6" (2150)
Machine System Weight: lb (kg): 7716 lbs. (3500)

Power Requirements [KVA]:	200-230V [13.5] Built in AVR
Compressed Air Requirements: 2.7 cu.ft./min. @ 71~100 psi

Equipped With:

MV2400R Technology in Control
Upgraded EPacks
Assortment of Work Holding